Description

ZTE R8882 S8000 FDD-LTE 800MHz Macro RRU

1- Technical Description ZTE R8882 S8000

The ZTE ZXSDR R8882 S8000 is an outdoor distributed macro Remote Radio Unit (RRU) developed by ZTE Corporation. It operates as the radio frequency (RF) transceiver front-end within ZTE’s Software-Defined Radio (SDR) base station architecture. This specific unit is engineered with a 2T4R (2 Transmit, 4 Receive) antenna configuration layout.

By utilizing two dedicated transmitter pathways alongside four independent receiver diversity channels, it dramatically optimizes uplink sensitivity, expands the macro cell-edge radius, and improves spectrum efficiency. The R8882 platform integrates intermediate frequency processing modules, high-efficiency digital pre-distortion power amplifiers, and heavy-duty cavity duplexers within a single weatherized node. Driven by remote software scripts via CPRI fiber, it allows operators to dynamically provision sub-1GHz digital dividend channels to deploy 4G FDD-LTE networks.

2- Specification and Features ZTE R8882 S8000

Hardware Specifications

Key Performance Features

• 4-Way Uplink Receiver Diversity: Employs 4 specialized Rx paths to capture faint cell-edge signals, boosting macro coverage footprints.
• High Efficiency PA: Combines Doherty Power Amplifiers and Digital Pre-Distortion (DPD) to drop operational grid energy consumption.
• SDR Multi-Standard Support: Flexible software architecture easily provisions the core hardware to change channel configurations instantly.
• Zero-Maintenance Layout: Completely fanless, sealed outdoor aluminum chassis removes mechanical wear points to lower maintenance overhead.

3- Frequency Spectrum ZTE R8882 S8000

The S8000 parameter configuration designates optimization for the low-frequency Digital Dividend (DD) spectrum band, specifically 3GPP E-UTRA Band 20 (800 MHz) running Frequency Division Duplexing (FDD):

• Downlink (Transmitting Range – Tx): 791 MHz – 821 MHz
• Uplink (Receiving Range – Rx): 832 MHz – 862 MHz
• Duplex Spacing Offset: Exactly 41 MHz separation guard band.

4- Variants of Products from ZTE Portfolio (S8000)

Within ZTE’s multi-carrier R8882 SDR catalog, different variants handle distinct regional sub-bands and capacity goals:

• ZTE R8882 S2600: High-frequency TDD/FDD companion variant optimized for dense urban Band 7/38/41 networks.
• ZTE R8882 S2100: Deployed for core IMT Band 1 (2100 MHz) macro coverage footprints.
• ZTE R8882 S1900: Configured specifically to run CDMA/GSM/LTE schemes across the 1900 MHz PCS spectrum block.
• ZTE R8862 S8000: Generational successor utilizing an ultra-compact architecture optimized for standalone FDD-LTE Band 20 blocks.

5- Compatible BBU, RRU, and Boards

The R8882 S8000 hooks up via CPRI fiber interfaces to ZTE’s modular Baseband Unit (BBU) system components:

Compatible ZTE Baseband Units (BBU)

• ZTE B8200: Universal distributed modular macro baseband unit shelf.

Compatible ZTE System Boards & Cards

• CC / CC16 Board (Part No: 1265573): Main control processor running network sync distribution and backhaul interfaces.
• BPC / BPK Cards (Part No: 1285321): Baseband processing cards handling physical layer data modulation profiles.
• UBP Board Series (Part No: 1305411): Universal multi-mode high-throughput data processing cards.
• FS Board (Part No: 1225433): Fabric Switch module mapping CPRI multi-drop fiber fiber connections up towers.

6- Similar Products for S8000 (Band 20 / 800MHz)

When executing cross-vendor network swaps or verifying warehouse inventory for 800Mhz Band 20 FDD macro setups, the true industry equivalents are:

• Huawei Technologies:
  • Model: Huawei RRU3959 (800M) (Part Number: 02311PHK — Dedicated 2T2R 2x60W Band 20 Macro RRU)
  • Model: Huawei RRU5909 (800M) (Part Number: 02311TBF — High-Efficiency Multi-Mode FDD Band 20 Transceiver)
  • Model: Huawei RRU3971 (800M) (Part Number: 02312CMH — 4T4R High-Power Low-Band Capacity Block)
• Nokia Solutions and Networks (NSN):
  • Model: Nokia Flexi RRH 2TX 800EU (FRMB) (Part Number: 472291A — 2T2R 2x40W Band 20 Remote Radio Head)
  • Model: Nokia Flexi RF Module 6*60W 800MHz (FRMF) (Part Number: 472930A — High-Capacity 6-Pipe Base Station Module)
  • Model: Nokia AirScale RRH 2T4R B20 120W (AHMA) (Part Number: 474255A — Modern AirScale-generation Band 20 Radio Head)
• Ericsson:
  • Model: Ericsson Radio 2217 B20 (Part Number: KRC 161 490/2 — Compact 2T2R 2x40W Band 20 Macro Radio Node)
  • Model: Ericsson Radio 2219 B20 (Part Number: KRC 161 622/2 — High-Power 2T2R 2x60W FDD Transceiver Node)

7- Accessories ZTE R8882 S8000

• Pole Mounting Bracket Set: Heavy structural iron dual-mast clamp kit (Part Number: ZTE-RRU-PMK-01)
• Wall Mounting Bracket Set: Reinforced flat concrete anchor base plate assembly (Part Number: ZTE-RRU-WMK-01)
• Outdoor DC Power input Plug: Circular weatherproof IP67 multi-pin aviation-grade male connector (Part Number: ZTE-CON-PWR-XCG18T)
• AISG Control Cable Assembly: 8-pin weatherproof RET control connector jumper cable, 5m length (Part Number: ZTE-CBL-AISG-5M)
• Optical SFP Transceiver Module: Multi-mode / Single-mode 3 Gbps LC duplex industrial optical modules (Part Number: ZTE-SFP-3G-LR-1310)
• RF Coaxial Jumper Cable: 1/2-inch superflex low-loss coax jumper with 50-ohm DIN-male connector ends, 3m length (Part Number: ZTE-JMP-DIN-3M).

Send a request

Please contact us to order or ask for competitive pricing and delivery time for ZTE products (or other telecommunication brands), you can also ask for other Part Numbers (Model Number of ZTE product). We can offer competitive prices, quality and delivery time with a wide product distribution network in the telecommunication  Brand new, Used and refurbished products market.

We only sell original products!

Email : Info@dorfatrade.com